What are solar thermal systems?
Solar systems by Regulus operate on the principle of transforming solar energy into heat that is transferred into a heat carrier and can be further utilized. Unlike other renewable or non-renewable sources, this one can supply energy almost for free, without any further significant operating costs. While photovoltaic (PV) systems transform solar radiation directly into electricity with max. 15% efficiency, solar thermal systems are able to utilize as much as 80% solar energy and the average annual efficiency incl. winter is usually some 50-60%.
Energy efficiency and payback period for solar thermal systems
Taking into account the quantity of solar energy
reaching the Czech Republic during one year
(about 1000 kWh per square meter)
, installation of a solar system will help you save a large part of expenditures on domestic water heating, space heating, pool heating and other heat-consuming technologies, maintaining your running costs very low.
Regulus Solar Systems excel at providing extra long service life exceeding 25 years thanks to the high-quality materials and components used, and their lifetime is several times longer than their payback period.
What are solar thermal systems used for?
Solar thermal systems are mostly used for DHW (domestic hot water) heating.
Such a solution brings many advantages since DHW is needed all year round, i.e. also at times of peak solar radiation, in contrast to space heating.
Another typical solar system layout is a combination system for DHW and heating. The solar system is then usually connected to a combi accumulation tank used to feed both DHW and space heating.
A solar system is by far not so efficient like e.g. a heat pump when space heating is concerned, however in well-insulated houses (esp. low-energy and passive houses ) a solar system can bring savings not only on DHW but also in tens of percent on heating costs . A pre-condition for using a solar system for heating is a low-temperature heating system, like underfloor heating or radiators designed for operating temperatures below 55°C.
Of course, solar systems can be well used also for pool heating , not only for seasonal outdoor ones, but also for year round indoor pools. These, however, will need a traditional backup source – solar radiation is free but unfortunately not always available.
More applications and detailed info on solar systems use are available in the section dealing with detached houses or in the section dealing with blocks of flats.
What do solar thermal systems consist of?
A principle component of a
a solar collector
, capable of absorbing solar radiation and transforming it to heat. The heat trapped inside the collector is then transferred by special
antifreeze solar fluid
into a solar thermal appliance.
A solar thermal appliance is usually a storage water heater where DHW is heated with solar energy, or an accumulation tank with heating water heated from the same source, or e.g. a pool.
A solar system needs to be backed up by a traditional source of heat, mostly an electric heating element usually installed directly into a solar cylinder or accumulation tank .
In order to transfer heat from collectors into a solar cylinder, any solar system shall be equipped with a circulation pump . A circulation pump is included in a solar pump station that involves also other important components of a solar circuit – a safety valve , flowmeter , non-return valve , filling valves etc.
A solar expansion vessel is also connected to a solar pump station .
Since a solar cylinder may be heated up to as much as 90°C by a solar system, a hot water outlet shall be fitted with a thermostatic mixing valve that keeps outgoing water at a safe temperature.
Solar system design
Proper operation of the entire system depends on the right design of number and type of solar collectors and the type and size of a solar cylinder. These components should be designed by an expert with respect to the properties of the building in question. It will be our pleasure to help you for free to design a proper system for your building, just please fill in this Cost Calculation Form .
We are ready to design and supply you a complete solar system consisting of top quality components that are tested and certified, and install it to your building in cooperation with our trained and certified partner companies.